Joerger ADC AM-F

The Joerger Enterprises, Inc. Model AM-F is a scanning ADC and uses a successive approximation ADC providing a cycle time of less than 40 µsec. The standard input range is +/-10V DC, and with a programmable range option the ranges are +/-10V, +/-5V, and +/-1V. Unipolar inputs are also available. The input range can be changed in the field by an on-board jumper or ordered with any range from 1 volt to 10 volts. Current inputs of 4-20mA can also be accepted.

For a complete description, please refer to the manual.

Data Records (NOT!)

The JAM-F is not officially an ORCA data taker. Thus, there are no data records associated with this hardware object at this time. This card can participate in the Process Controller as an ADC element.

Set the Low and High limits. Values out of range can trigger an ORCA Alarm if the alarm for that channel is enabled.

Set up an optional polling interval

Set the ADC range, Read back limits or adc values to the status log

Load this dialog’s values into hardware

Plot the ADC values over time in groups of four

Enable/Disable scanning and select which channels to scan